Products Description Polyethylene terephthalate resin (PET) is commonly used as the outer film for LCD tablets. PET polyester film is widely applied across various industries due to its excellent dimensional stability and high transparency. PET maintains outstanding physical and mechanical propertie
Products Description Ethylene propylene diene monomer (EPDM) rubber is a copolymer composed of ethylene, propylene, and a third monomer. It offers excellent resistance to ozone, weathering, heat, and low temperatures, along with superior electrical insulation properties and permeability similar to t
Product Description Poly(acrylonitrile-butadiene-styrene) copolymer (ABS) is a representative two-phase, three-component thermoplastic resin consisting of a continuous poly(styrene-acrylonitrile) copolymer (SAN) phase and a dispersed polybutadiene rubber phase. It appears as either a colorless monoc
Product Description Methanol, also known as wood alcohol, is an organic compound and the simplest saturated monohydric alcohol. It is a colorless, clear, flammable, volatile, and toxic liquid with a slight alcoholic odor. Ingestion of 5–10 mL may cause blindness, while consuming larger quantities ca
Product Description Diphenyl Ether (CAS#101-84-8) is a colorless crystalline solid or liquid with a mild and pleasant odor. It melts at approximately 81 °F (27.2 °C), becoming a clear, colorless liquid when heated above its melting point. The compound is recognized for its distinctive floral-green,
Products Description of Polyisobutylene CAS#9003-27-4 Polyisobutylene (PIB) is a non-toxic, water-white viscous liquid characterized by excellent flexibility at low temperatures, attributed to its low glass transition temperature. It is a linear, fully saturated polymer with a highly flexible molecu
Product Description Propylene is the second simplest member of the olefin family, with the structural formula CH₂=CHCH₃. It is one of the most important organic chemical feedstocks after ethylene and benzene. It is typically obtained from gases produced during thermal cracking and catalytic cracking
Product Description Polybutene alloy (PB-A) is a polymer material produced through in-kettle polymerization technology using butene-1 and a second monomer as raw materials. Compared with traditional polybutylene-1 (PB-1), PB-A effectively overcomes limitations such as slow crystal transformation and
Product Description Adiponitrile is a colorless to pale yellow liquid with good solubility properties and a density lower than that of water. Contact with this substance may cause irritation to the skin, eyes, and mucous membranes. It may be harmful or toxic if ingested, inhaled, or absorbed through
Product Description Polyacrylic acid copolymer emulsions are typically prepared through the copolymerization of low-ester acrylic monomers, such as methyl acrylate, with other monomers including acrylonitrile, styrene, dibutyl maleate, methacrylates, vinyl chloride, vinylidene chloride, and vinyl ac
Product Description 4,4'-Diphenylmethane diisocyanate (MDI) is widely used in the production of various polyurethane materials, including flexible and rigid foams, as well as paints, lacquers, adhesives, binding agents, synthetic rubbers, and elastomeric fibers.
Product Description Formic acid is an important chemical raw material, first discovered by Fisher in 1670, and later produced in pure form by A. S. Marggret in 1749. It was initially identified through the distillation of red ants, which is also the origin of its name. Formic acid is widely distribu
Products Description Polyethylene terephthalate resin (PET) is commonly used as the outer film for LCD tablets. PET polyester film is widely applied across various industries due to its excellent dimensional stability and high transparency. PET maintains outstanding physical and mechanical propertie
Products Description Ethylene propylene diene monomer (EPDM) rubber is a copolymer composed of ethylene, propylene, and a third monomer. It offers excellent resistance to ozone, weathering, heat, and low temperatures, along with superior electrical insulation properties and permeability similar to t
Product Description Poly(acrylonitrile-butadiene-styrene) copolymer (ABS) is a representative two-phase, three-component thermoplastic resin consisting of a continuous poly(styrene-acrylonitrile) copolymer (SAN) phase and a dispersed polybutadiene rubber phase. It appears as either a colorless monoc
Product Description Methanol, also known as wood alcohol, is an organic compound and the simplest saturated monohydric alcohol. It is a colorless, clear, flammable, volatile, and toxic liquid with a slight alcoholic odor. Ingestion of 5–10 mL may cause blindness, while consuming larger quantities ca
Product Description Diphenyl Ether (CAS#101-84-8) is a colorless crystalline solid or liquid with a mild and pleasant odor. It melts at approximately 81 °F (27.2 °C), becoming a clear, colorless liquid when heated above its melting point. The compound is recognized for its distinctive floral-green,
Products Description of Polyisobutylene CAS#9003-27-4 Polyisobutylene (PIB) is a non-toxic, water-white viscous liquid characterized by excellent flexibility at low temperatures, attributed to its low glass transition temperature. It is a linear, fully saturated polymer with a highly flexible molecu
Product Description Propylene is the second simplest member of the olefin family, with the structural formula CH₂=CHCH₃. It is one of the most important organic chemical feedstocks after ethylene and benzene. It is typically obtained from gases produced during thermal cracking and catalytic cracking
Product Description Polybutene alloy (PB-A) is a polymer material produced through in-kettle polymerization technology using butene-1 and a second monomer as raw materials. Compared with traditional polybutylene-1 (PB-1), PB-A effectively overcomes limitations such as slow crystal transformation and
Product Description Adiponitrile is a colorless to pale yellow liquid with good solubility properties and a density lower than that of water. Contact with this substance may cause irritation to the skin, eyes, and mucous membranes. It may be harmful or toxic if ingested, inhaled, or absorbed through
Product Description Polyacrylic acid copolymer emulsions are typically prepared through the copolymerization of low-ester acrylic monomers, such as methyl acrylate, with other monomers including acrylonitrile, styrene, dibutyl maleate, methacrylates, vinyl chloride, vinylidene chloride, and vinyl ac
Product Description 4,4'-Diphenylmethane diisocyanate (MDI) is widely used in the production of various polyurethane materials, including flexible and rigid foams, as well as paints, lacquers, adhesives, binding agents, synthetic rubbers, and elastomeric fibers.
Product Description Formic acid is an important chemical raw material, first discovered by Fisher in 1670, and later produced in pure form by A. S. Marggret in 1749. It was initially identified through the distillation of red ants, which is also the origin of its name. Formic acid is widely distribu
